LGB RN / RGV-3015
Шлифовальные и фрезерные станки фирмы LGB
|
RN 3015 |
RGV 3015 |
||
| Travels | |||
| X axis (Longitudinal travel) | mm | 3 200 | 3 200 |
| Y axis (cross travel) | mm | 1 580 | 1 580 |
| Z axis (vertical travel) | mm | 630 | 630 |
| Distance between bridge frame | mm | 1 660 | 1 660 |
| Distance between table & grinding wheel | mm | 630 | 630 |
| Distance between table & grinding wheel center | mm | 655 | 655 |
| Distance between the ground and the top of the magnetic chuck | mm | 865 | 865 |
| Spindle & Wheel | |||
| Spindle power with electric drive | kW | 30 – S1 | 30 – S1 |
| Standard grinding wheel dimension | mm | 500x50x127 | 500x50x127 |
| Grinding wheel rotation speed | m/s | 22 / 34 | 22 / 34 |
| Spindle dressing: Z=52mm | mm | Y = 55 | Y = 55 |
| Speed & technique of travel | |||
| Longitudinal X by automatic phase motor and frequency converter; variable speed | m/mn | 1 – 30 | 1 – 30 |
| Cross Y automatic: incremental travel or continuous. Variable speed manual shift |
mm/mn | 4 – 6 000 | 4 – 6 000 |
| Ballscrew with positioning | mm | 0.001 | 0.001 |
| Variable rapid speed vertical travel | mm/mn | 0.3 – 400 | 0.3 – 400 |
| Vertical slow speed travel | mm/mn | 0.1 – 2 | 0.1 – 2 |
| Dimensions, weight & power installed | |||
| Lenght x width x height (machine OFF) | mm | 7200x2950x2490 | 7200x2950x2490 |
| Lenght x width x height (machine ON) | mm | 7200x2950x2760 | 7200x2950x2760 |
| Power used | kW | 43 | 43 |
| Magnetic chuck weight capacity | Kg | 8 000 | 8 000 |
| Net weight | Kg | 15 000 | 15 000 |